Configuration Tip See the general description for information about the following tabs of the device editor. Tab: <device name> I/O Mapping Tab: <device name> IEC Objects Tab: <device name> Parameters
Tab: CANopen Manager – General Table 3 . General Node-ID The node number identifies the CANopen Manager as unique (value range: 1...127). Check and Fix Configuration Opens the dialog of the same name.
Tab: CANopen Remote Device – General The general settings of the CANopen Slave are defined in this dialog of a CANopen Remote Device (slave). Table 8 . General Node-ID The node number identifies the C
Tab: CANopen Device – PDOs Object: CANopen Remote Device, CANopen Local Device This dialog is available only in the device editor of a CANopen Slave of version V3.5.6.0 or higher. It shows all PDOs an
Tab: CANopen Remote Device – SDOs During the initialization of the CAN bus, CODESYS transmits the current configuration settings by using SDOs (service data objects). On this tab, you configure the ne
Tab: CANopen Remote Device – SRDOs In the dialog, you define the safety-oriented data objects (SRDOs). The Receive SRDOs are defined on the left side and the Transmit SRDOs are defined on the right si
Diagnosis in the User Interface CANopen Manager (Master) device tree In online mode, the device tree allows for a pinpointing of a pending diagnosis. Green symbol when the device is OPERATIONAL. Error
Libraries: CANopen Manager (Master) CAA CiA 405 3S CANopenStack 3S CANopen Safety :
CANopen Local Device (Slave) :
