Configuring the Camera Module Saving camera images Requirement: The Raspberry Pi Camera expansion hardware is connected and activated. The Camera.project project contains an application which controls
Configuring GPIO The GPIO.project project contains an application with free GPIOs with a device editor where the I/O image is configured. The digital inputs and outputs are also defined there. In the
Configuring I 2 C Requirement: Special hardware is connected via I²C. The I2CExample.project project contains an application which controls various chips and breakouts connected via I²C. Connected har
Configuring A/D Converter MPC3008 Requirement: Special hardware is connected via SPI. The MCP3008_Temperature.project project contains an application which reads an analog temperature sensor (LM35) co
Configuring Port Expander MCP23S17 Requirement: Special hardware is connected via SPI. The MCP23S17.project project contains an application where a port expander chip (MCP23S17) has been connected via
Configuring Servomotor Requirement: An Adafruit 16-channel/12-bit PWM board is connected via I²C and a model servo is wired to its first PWM channel. The SoftMotion Servo Example.project project conta
Configuring EtherCAT Requirement: The Beckhoff EK1100 with Beckhoff EL2008 devices are connected to the Ethernet adapter. The EtherCAT.project project contains an application where an EtherCAT fieldbu
Configuring OPC UA The OPCUA.project project contains an application where variables are configured to access an OPC UA client. To do this, the two variables of the PLC_PRG object have been published
Configuring Sense HAT Requirement: You need the Raspberry Pi Sense HAT add-on board. A Raspberry Pi with a connected Sense HAT add-on board is equipped with sensors for acceleration, temperature, a
