Controller – Media Redundancy Object: PROFINET Controller This tab is used to configure the media redundancy protocol (MRP) for the PROFINET Devices addressed by this PROFINET Controller. Table 10 . <
Controller – Status Object: PROFINET Controller The tab displays the current status of the controller, for example in the Controller Status field the phases of powering up. The data in Ethernet Statis
Device – Port Data Object: PROFINET Device On the tab, you define the port configuration as well as the neighboring devices and the connection cable Shared device : This device is configured by anothe
Command: Scan for Devices Function : The command establishes a temporary connection to the controller with the active PROFINET Controller on it and determines the PROFINET devices (Device and Controll
IO-Link integration IO-Link devices such as PROFINET Modules or Devices with the IO-Link Master Function (IOLM) and connected IO-Link Devices (IOLD, for example sensors) can be used in principle witho
Automatic Assignment of Station Names A PROFINET Device can be exchanged due to topology information and configured automatically. No additional actions are required. The requirement is that you have
Controller – Topology Object: PROFINET Controller This tab provides an overview of the topology of a PROFINET network and the neighborhood/peer information for each PROFINET Device. PROFINET Devices c
Media Redundancy (MRP) Media redundancy (based on MRP – Media Redundancy Protocol) is a function for increasing the system availability by means of redundant communication paths. Standard Ethernet all
Reconfigure The "Reconfigure" function allows for the dynamic adaptation of a PROFINET configuration, which was initially downloaded to the controller, to the application at runtime. The DED.Reconfigu
Controller Redundancy To increase the availability of the system, you can use a second controller with a redundant PROFINET controller combined with CODESYS Redundancy . CODESYS Redundancy acts as a "
