Runtime Configuration For communication with the PROFINET RT protocol, the PROFINET IEC stacks use a special runtime interface (SysEthernet) that allows the transmission of RAW Ethernet frames. This r
Firewall and Package Filter The PROFINET stacks do not use the configured Ethernet adapters of the PLC exclusively. The PROFINET protocols run parallel with the network protocols (for example, UDP), a
CODESYS Communication Insofar as multiple Ethernet adapters exist on the controller, it is generally recommended to separate the CODESYS communication (project download, monitoring, etc.) and the fiel
Configuring the PROFINET Controller Tip We recommend that you configure a static IP address in the operating system for the used Ethernet adapter. Windows The following configuration steps are necessa
Configuring a PROFINET Device Linux The following configuration steps are necessary in Linux for a standard-compliant behavior (here as an example for Debian/Raspi) : In the CODESYS project, disable t
Runtime Configuration (CIFX) For the CIFX version, the corresponding runtime component must be specified in the PROFINET configuration file (*.cfg). In the configuration file, additional settings for
Troubleshooting This section describes the troubleshooting of technical problems when using the CODESYS PROFINET drivers (Controller and Field Device). In particular, it covers problems that can occur
General The configuration of the PROFINET Field Device consists of the device itself as well as the modules inserted below. CODESYS provides two different PROFINET Field Devices: A variant especially
Configuration Tip See the general description for information about the following tabs of the device editor. Tab: <device name> I/O Mapping Tab: <device name> IEC Objects Tab: <device name> Parameters
