PROFINET and Other Drivers The PROFINET Controller and Device require exclusive access to the low-level Ethernet component (SysEthernet). As a result, for example, they cannot run parallel with EtherC
Hardware Requirements PROFINET requires an Ethernet adapter that supports at least 100 mbps with full duplex. All applied network components (switches) also have to support this transmission mode. MAC
Error due to multiple IP addresses When the PROFINET Controller is started, it checks the network for duplicate IP addresses. The operation of establishing the connection can be aborted with the error
Device – Port Data Object: PROFINET Device On the tab, you define the port configuration as well as the neighboring devices and the connection cable Shared device : This device is configured by anothe
Device – State Object: PROFINET Device The tab displays the diagnostic data and the alarms of the device. Diagnosis Data The diagnostics currently located in the device. The current diagnostics data i
Module – General Object: PROFINET Module Table 12 . Module Information ID number Identification of the module (from the device description). Slot number Position of the I/O module below the I/O device
Module – Status Object: PROFINET Module The tab displays the diagnostic data and the alarms of the module. Diagnosis Data The diagnostics currently located in the device. The current diagnostics data
Automatic Assignment of Station Names A PROFINET Device can be exchanged due to topology information and configured automatically. No additional actions are required. The requirement is that you have
Controller Redundancy To increase the availability of the system, you can use a second controller with a redundant PROFINET controller combined with CODESYS Redundancy . CODESYS Redundancy acts as a "
