Diagnosis in the Application Device Function Block For each PROFINET Device in the device tree, a function block is created that provides basic information about the connection or configuration status

only with RTE Vx >= V3.5 SP

Reconfigure The "Reconfigure" function allows for the dynamic adaptation of a PROFINET configuration, which was initially downloaded to the controller, to the application at runtime. The DED.Reconfigu

Command: Scan for Devices Function : The command establishes a temporary connection to the controller with the active PROFINET Controller on it and determines the PROFINET devices (Device and Controll

Command: Add  PROFINET  Diagnosis Resources Function : The command generates a text list with the diagnostic messages from the GSDML files. Call : Project menu → Add Object ; context menu in the Devic

IO-Link integration IO-Link devices such as PROFINET Modules or Devices with the IO-Link Master Function (IOLM) and connected IO-Link Devices (IOLD, for example sensors) can be used in principle witho

Device Tool Integration Special configuration tools which are supplied by the device manufacturers are required for the parameterization of some PROFIsafe devices. These "device tools" can be called d

Hardware Requirements PROFINET requires an Ethernet adapter that supports at least 100 mbps with full duplex. All applied network components (switches) also have to support this transmission mode. MAC

cannot be maintained (see 1.4, 1

with this commands: sysctl -w net.ipv4.conf.all.arp_announce=1 sysctl -w net.ipv4