Diagnosis in the User Interface Device tree In online mode, the device tree allows for an exact pinpointing of a pending diagnosis. The error flag (red symbol) indicates a hard error, such as an incor

Libraries: PROFINET Device ProfinetDeviceConfig CommFB ProfinetCommon :

Runtime Configuration For communication with the PROFINET RT protocol, the PROFINET IEC stacks use a special runtime interface (SysEthernet) that allows the transmission of RAW Ethernet frames. This r

Firewall and Package Filter The PROFINET stacks do not use the configured Ethernet adapters of the PLC exclusively. The PROFINET protocols run parallel with the network protocols (for example, UDP), a

CODESYS Communication Insofar as multiple Ethernet adapters exist on the controller, it is generally recommended to separate the CODESYS communication (project download, monitoring, etc.) and the fiel

Configuring the PROFINET Controller Tip We recommend that you configure a static IP address in the operating system for the used Ethernet adapter. Windows The following configuration steps are necessa

Configuring a PROFINET Device Linux The following configuration steps are necessary in Linux for a standard-compliant behavior (here as an example for Debian/Raspi) : In the CODESYS project, disable t

Runtime Configuration (CIFX) For the CIFX version, the corresponding runtime component must be specified in the PROFINET configuration file (*.cfg). In the configuration file, additional settings for

Troubleshooting This section describes the troubleshooting of technical problems when using the CODESYS PROFINET drivers (Controller and Field Device). In particular, it covers problems that can occur

Aborting of the Connection (DHT) Especially with PROFINET Controllers on platforms with limited real-time capabilities, such as Linux or CODESYS Control Win V3 , a send clock selected too low (< 4 ms)