PNIO Status (Error Code) The PNIOStatus is an 8-place hexadecimal code which is not part of the PROFINET diagnosis in the actual sense. The PNIOStatus is an error/abort code of failed services and is
FAQ Question Answer When a PROFINET Device or a Module is marked red (error), does that affect other devices or modules? No. They are not affected during a data exchange. Is a diagnosis in the field d
General The configuration of the PROFINET Controller consists of the controller and the PROFINET devices (Slaves) inserted below it. The devices are configured by the controller and exchange data with
Configuration Tip See the general description for information about the following tabs of the device editor. Tab: <device name> I/O Mapping Tab: <device name> IEC Objects Tab: <device name> Parameters
Controller – General Object: PROFINET Controller The PROFINET Controller, like the slaves, is identified by the station name. In the case of CIFX variants, you can also configure the IP settings here.
Controller – Overview Object: PROFINET Controller This tab shows an overview of all devices with their communication settings. The station name, the IP configuration, as well as the transfer speed of
Controller – Topology Object: PROFINET Controller This tab provides an overview of the topology of a PROFINET network and the neighborhood/peer information for each PROFINET Device. PROFINET Devices c
Controller – Media Redundancy Object: PROFINET Controller This tab is used to configure the media redundancy protocol (MRP) for the PROFINET Devices addressed by this PROFINET Controller. Table 10 . <
Controller – NetX Configuration Object: PROFINET Controller As an alternative to the general PROFINET node, you can add the PROFINET node (NetX) to the device tree in the case of a NetX fieldbus. The
