CODESYS Sercos CODESYS GmbH Version: V4.0.0.0, July 2021 www.codesys.com Last update: Mon, 9 Oct 2023 08:40:14 :
CODESYS Sercos Tip See the general description for information about the following tabs of the device editor. Tab: <device name> I/O Mapping Tab: <device name> IEC Objects Tab: <device name> Parameter
Tab: Sercos Master – General Object: Sercos Master The tab in the configurator of the Sercos Master contains the basic settings for network communication. Table 1 . Settings Sercos cycle time Time int
Tab: Sercos Slave – General Object: Sercos Slave The tab in the configurator of the Sercos Slave contains the basic settings for network communication. In the initialization phase, the slave detects t
Tab: Sercos Slave – User Parameter Object: Sercos Slave On this tab, you define additional parameters which are transmitted once only into the bus system during the phase of the starting procedure all
tab: Sercos Module – Oversampling Object: Sercos Module In this slave tab, you can use the oversampling function for reading of special input channels faster than permitted by the bus cycle time. For
tab: Sercos Module – Drive Inputs and Outputs Object: Sercos Module The tab appears instead of the function group dialog when the FSP type of the driver is FSP_Drive (0x002...). In this way, you confi
Tab: Sercos Module – User Parameter Object: Sercos Module This tab is similar to the device editor tab of the superordinate Sercos slave. You can add even more parameters that are necessary for this s
Tab: Sercos Module – Function Groups Object: Sercos Module On this tab, you define the real-time data. Depending on the imported device description file, one or more function groups will be displayed
