Diagnosis in the User Interface Device tree In online mode, the device tree allows for an exact pinpointing of a pending diagnosis. Error flag (red triangle): Hard error, such as an incorrect/missing
Troubleshooting J1939 Problem Possible Solution The CAN bus node is red or has a red exclamation mark. See the general troubleshooting for the CAN bus. The J1939 Manager is red or has a red exclamatio
Libraries: J1939 IoDrvJ1939 :
CODESYS CANbus CODESYS supports the following CAN-based fieldbuses: CANopen J1939 For more general information on fieldbus support in CODESYS , see: fieldbus support CANopen CANopen is a protocol whi
Configuration Tip See the general description for information about the following tabs of the device editor. Tab: <device name> I/O Mapping Tab: <device name> IEC Objects Tab: <device name> Parameters
Tab: CANbus – NetX Configuration As an alternative to the general CAN bus node, the CAN bus node (NetX) can be added to the device tree in the case of a NetX fieldbus. The NetX configuration dialog is
Functions CAN RAW CODESYS provides the capability of sending and receiving CAN messages via the application. No devices are required in the device tree to do this. The access can also be executed para
Diagnosis This chapter describes the general diagnosis in the case of CAN problems – regardless of the used fieldbus stack. Most problems are traced back to incorrect wiring or faulty bus device or CA
CODESYS Trace With a Trace you can follow the value curve of variables on the controller in a similar way as a digital sampling oscilloscope. The data and its time course can be displayed in the trace
