General CODESYS provides two different EtherNet/IP Scanners. (1): A device which you can insert directly below each network adapter. An Ethernet/IP Scanner (IEC) can also be an adapter at the same tim
Inserting an EtherNet/IP Scanner Create a new project with the CODESYS Control Win V3 controller. In the device tree, select the CODESYS Control Win V3 controller. In the context menu, click Add Devic
Configuration Tip See the general description for information about the following tabs of the device editor. Tab: <device name> I/O Mapping Tab: <device name> IEC Objects Tab: <device name> Parameters
Tab: EtherNet/IP Scanner – General The tab in the configurator of the EtherNet/IP Scanner includes the basic settings. The network interface used by the scanner is configured in the settings of the Et
Tab: EtherNet/IP Scanner NetX – General The tab in the configurator of the EtherNet/IP Scanner contains the basic settings for communication in the network. Table 2 . Address Settings Use static IP ad
Tab: EtherNet/IP Scanner NetX – NetX Configuration As an alternative to the general EtherNet/IP node, the EtherNet/IP node (NetX) could also be added to the device tree in the case of a NetX fieldbus.
Tab: EtherNet/IP Scanner – I/O Mapping Note: No project variables can be mapped to the outputs and inputs with the EtherNet/IP Scanner. :
EtherNet/IP Remote Adapter :
Tab: EtherNet/IP Adapter – General The tab in the device editor of the EtherNet/IP Adapter contains the basic settings for communication in the network. Table 6 . Address Settings IP address Address f
Tab: EtherNet/IP Adapter – Connections The top area of the tab shows a list of all configured connections. If there is an "Exclusive owner" connection in the EDS file, then it is automatically added w
