Configure External Storage Devices You can configure the BeagleBone Black to access a USB storage device or µSD card from CODESYS Control for BeagleBone SL . The compatibility of specific USB stora
Raspberry Pi Tip Use this Raspberry Pi with the Raspbian operating system, which you can get from the Raspberry Pi Foundation . Important The Raspberry Pi was developed for testing and teaching purp
Development of Drivers There are many devices which can be connected to the Raspberry Pi . CODESYS Control for Raspberry Pi SL supports only a small part of the available hardware. If you want to co
Configuring the Runtime In version V3.5 SP14 and higher, CODESYS Control for Raspberry Pi SL also supports multi-core capable hardware ( Raspberry Pi 2 and Raspberry Pi 3). The runtime system can be
Configuring WebVisu The project: WebVisu.project contains an application with a user interface created with CODESYS Visualization . Open the WebVisu.project project. In the device tree, double-click D
Configuring the Camera Module Saving camera images Requirement: The Raspberry Pi Camera expansion hardware is connected and activated. The Camera.project project contains an application which controls
Configuring GPIO The GPIO.project project contains an application with free GPIOs with a device editor where the I/O image is configured. The digital inputs and outputs are also defined there. In the
Configuring I 2 C Requirement: Special hardware is connected via I²C. The I2CExample.project project contains an application which controls various chips and breakouts connected via I²C. Connected har
Configuring A/D Converter MPC3008 Requirement: Special hardware is connected via SPI. The MCP3008_Temperature.project project contains an application which reads an analog temperature sensor (LM35) co
Configuring Port Expander MCP23S17 Requirement: Special hardware is connected via SPI. The MCP23S17.project project contains an application where a port expander chip (MCP23S17) has been connected via
