How to Create a Program for Controlling the Axis Group The following instructions describe how to create a program for controlling an axis group. Requirement : A project has been created with an axis
Jogging of Axis Groups You can use the SMC_GroupJog2 function block to move an axis group in space. The SMC_GroupJog2 function block has two Boolean inputs for each coordinate. One input is for traver
PTP Movements For PTP movements, the path in space depends on the kinematics and only the start and destination points are fixed. The movement is fully synchronous so that the acceleration, constant m
Overview CP movements (Continuous Path) are given by their geometric path. In the case of robotics, these are linear segments ( MC_MoveLinearAbsolute and MC_MoveLinearRelative ) and circular segments
Orientation Interpolation for CP Movements In the case of CP movements such as MC_MoveLinearAbsolute , MC_MoveLinearRelative , MC_MoveCircularAbsolute , or MC_MoveCircularRelative , any target orienta
Tolerances for Path Accuracy Tolerances for path accuracy can be set for axis groups. In the event of an unexpected movement of a dynamic coordinate system, these tolerances allow an axis group to cat
Buffering and Blending of Movements Movement commands can be buffered with CODESYS SoftMotion . Blending of the path between the buffered movements is possible. The commanded path is adjusted by round
Waiting Between Movements SoftMotion Robotics provides the capability of waiting for a specific time between two movements. This may be necessary, for example, when a robot is supposed to grip a workp
Stopping on the Path with MC_GroupHalt or MC_GroupStop The MC_GroupHalt and MC_GroupStop function blocks allow for stopping on the path, taking into account configurable deceleration and jerk limits.
