Configuring A/D Converter MPC3008 Requirement: Special hardware is connected via SPI. The MCP3008_Temperature.project project contains an application which reads an analog temperature sensor (LM35) co
Configuring Port Expander MCP23S17 Requirement: Special hardware is connected via SPI. The MCP23S17.project project contains an application where a port expander chip (MCP23S17) has been connected via
Configuring 1-Wire Requirement: A 1-wire temperature sensor is connected. The OneWire.project project contains an application which detects devices connected via 1-Wire. Moreover, a DS18B20-type tempe
Configuring Servomotor Requirement: An Adafruit 16-channel/12-bit PWM board is connected via I²C and a model servo is wired to its first PWM channel. The SoftMotion Servo Example.project project conta
Configuring EtherCAT Requirement: The Beckhoff EK1100 with Beckhoff EL2008 devices are connected to the Ethernet adapter. The EtherCAT.project project contains an application where an EtherCAT fieldbu
Configuring OPC UA The OPCUA.project project contains an application where variables are configured to access an OPC UA client. To do this, the two variables of the PLC_PRG object have been published
Configuring Sense HAT Requirement: You need the Raspberry Pi Sense HAT add-on board. A Raspberry Pi with a connected Sense HAT add-on board is equipped with sensors for acceleration, temperature, a
Application-Specific Notes To optimize special use cases, we recommend the following application/configuration settings. Configuration for use case: PROFINET When using PROFINET , you should observe t
Command: EtherNet/IP – Scan for Devices Function : The command establishes a temporary connection to the hardware and detects the devices in the network. Then you can apply the scanned devices into th
