CODESYS IO-Link CODESYS GmbH Version: V4.2.0.0, October 2023 www.codesys.com Last update: Thu, 12 Oct 2023 08:54:08 :
CODESYS IO-Link Tip See the general description for information about the following tabs of the device editor. Tab: <device name> I/O Mapping Tab: <device name> IEC Objects Tab: <device name> Paramete
Tab: IO-Link – IO-Link Device Info Object: IO-Link Master The tab of the IO-Link module displays various information about the product and the vendor of the device. :
Tab: IO-Link – Parameters Object: IO-Link Master The tab can be used to read the parameters from the IO-Link device, to modify them and then to write them back to the device. The range of functions de
CODESYS KNX CODESYS GmbH CODESYS KNX Last update: V4.0.2.0, June 2021 www.codesys.com :
Preprocessing G-Code : G40 , G41 , G42 , G43 , G50 , G51 , G52 , G60 , G61 , G70 , G71 Function : The commands activate preprocessing modules, such as SMC_SmoothPath , SMC_RoundPath , SMC_AvoidLoop ,
Additional Spline Axes A, B, C G code word : A , B , C Function : The words A, B, and C define the target positions for spline additional axes. In principle, the additional axes act like P , Q , U , V
Smoothing of Additional Axis Motion using Multiple Objects G code : G70 , G71 Function : G71 starts and G70 ends the smoothing of motion on the additional axis that is given in L and travels over mult
Configuring Single Additional Axes as Modulo Axes (PA/PB/…) Function: For the axes A, B, C, P, Q, U, V, and W, a modulo period can be specified by setting the words PA , PB , PC , etc. By default, PA
Using Variables Syntax $<Variablenname>$ Valid IEC base types for variables and expressions: INT , SINT , USINT , UINT , DINT , UDINT , BYTE , WORD , DWORD , REAL , and LREAL . Exceptions include the
