ProfinetFDevice (FB) Tip The version of the function block as described here corresponds to the latest version of the function block in the version list in the chapter "Driver Libraries" in the Safety

ProfinetFDeviceDiagnostics (STRUCT) Structure of the diagnostic information that the ProfinetFDevice function block makes available to the application. Table 128 . Structure components of ProfinetFDev

CODESYS Ethernet Adapter CODESYS GmbH Version: V4.1.0.0, December 2022 www.codesys.com Last update:  Mon, 16 Jan 2023 09:48:18 :

CODESYS Ethernet Adapter Tip See the general description for information about the following tabs of the device editor. Tab: <device name> I/O Mapping Tab: <device name> IEC Objects Tab: <device name>

Tab: Ethernet-Adapter – General Object: Ethernet Adapter You define the network interface on this tab. Network interface : Opens the Network Adapters dialog. The Ethernet adapters can be selected here

Debug Mode Switching to debug mode The following commands lead to a switch to debug mode: . Commands in the "Online" menu Reset cold . Commands in the Debug menu Start Stop Write Values Force Values U

Monitoring During monitoring in online mode, as long as a login to the application exists, the online status and the monitored values of visible variables are taken cyclically from the controller and

Coordination with the Standard Controller Important If physical devices and variables of the standard controller are applied (as a logical I/O object) in the safety controller, then the application mu

Object: F-Device Module (below the standard controller) Tab: Status If you are logged in to the standard application, then diagnostic information is displayed on the Status tab of the F-Modules below

CANbus Diagnosis Diagnosis of Hardware Failures Most CAN problems are traced back to incorrect wiring or faulty CAN devices. Potential errors include the following: Missing or incorrectly dimensioned