Control RTE V [...] of CODESYS Control RTE V [...] Control RTE V3 .
with CODESYS Control RTE V [...] with the CODESYS Control RTE V [...] RTE V3 with Net
Using GPIOs and Analog Inputs This chapter describes the limitations when using the I/O mapping of a BeagleBone Black to access the GPIOs and analog inputs. :
Configure External Storage Devices You can configure the BeagleBone Black to access a USB storage device or µSD card from CODESYS Control for BeagleBone SL . The compatibility of specific USB stora
Raspberry Pi Tip Use this Raspberry Pi with the Raspbian operating system, which you can get from the Raspberry Pi Foundation . Important The Raspberry Pi was developed for testing and teaching purp
Development of Drivers There are many devices which can be connected to the Raspberry Pi . CODESYS Control for Raspberry Pi SL supports only a small part of the available hardware. If you want to co
Sample Projects The following sample projects are located in the installation directory (example C:\Users\<Name>\ CODESYS Control for Raspberry Pi SL \3.5.11.0\Examples ). :
Configuring WebVisu The project: WebVisu.project contains an application with a user interface created with CODESYS Visualization . Open the WebVisu.project project. In the device tree, double-click D
Configuring the Camera Module Saving camera images Requirement: The Raspberry Pi Camera expansion hardware is connected and activated. The Camera.project project contains an application which controls
Configuring GPIO The GPIO.project project contains an application with free GPIOs with a device editor where the I/O image is configured. The digital inputs and outputs are also defined there. In the
